Sp Flash Tool Stuck At Download Da 100 'link' < 95% ULTIMATE >

"Download DA 100%"

When the SP Flash Tool gets stuck at , it typically indicates a communication failure between the software and the device's boot ROM after the initial handshake is complete . The "Download DA" phase is when the tool sends the Download Agent (the code that handles the actual flashing) to the phone's internal memory; sticking at 100% means the DA was sent but never successfully executed or "responded" back. Common Causes & Solutions Stuck at Download DA 100% - Hovatek

1. Download Zadig (USB driver installer).
2. Connect your powered-off phone. When the "Preloader" or "DA USB" port appears in Device Manager (for 5 seconds), open Zadig.
3. From the dropdown, select the Mediatek device.
4. Replace the driver with libusb-win32.
5. Reboot your PC and try SP Flash Tool again. This bypasses the standard COM port handshake entirely.

Sometimes the USB handshake is too fast or too slow. sp flash tool stuck at download da 100

Part 4: Hardware Causes (When Software Fixes Fail)

2. Check USB Connection