Service Manual: For Bomag Bmp851
This review is based on the typical structure of Bomag’s official documentation (Bomag Part No. 008 121 67 or similar variants).
- Ideal for experienced heavy-equipment technicians, fleet maintenance supervisors, and authorized service centers.
- Less suitable as a standalone learning resource for entry-level mechanics without mentor support or additional multimedia instruction.
Compaction plates generate intense vibration and hydraulic pressure. The service manual details lock-out/tag-out procedures, safe lifting points, and hydraulic pressure release protocols. Ignoring these can lead to severe injury. service manual for bomag bmp851
- Locate the neutral adjustment screw on the hydraulic valve block (detailed photo in manual).
- Loosen the lock nut.
- Start the engine and set to idle.
- Turn the adjustment screw slowly until the plate stops moving completely.
- Tighten lock nut while holding screw.
- Test forward/reverse engagement – no delay or jerkiness should be present.
Drum seal replacement
(for water or asphalt sticking issues):
To demonstrate the manual's value, here are two common procedures abstracted from the official guide. This review is based on the typical structure
Bomag BMP851
In the world of heavy compaction equipment, the stands out as a legendary "Rammax" series reversible vibratory plate. Known for its brutal efficiency in compacting granular soils, gravel, and asphalt in trenches and confined areas, this machine is a workhorse on construction sites from Berlin to Brisbane. safe lifting points