GoldHEN v2.4b17.3 update is the latest standard for PS4 homebrew, primarily focusing on stability for the v11.00 exploit and adding support for the v11.02/v11.50 firmware through specific bridge methods. Quick Setup Guide (v11.00 & Below) Preparation : Ensure your PS4 is on firmware or lower. Download the GoldHEN.bin file and place it on the root of a FAT32/exFAT USB drive The Exploit (PPPwn) : Use a PC or a Raspberry Pi to run the PPPwn exploit via an Ethernet cable. Loading GoldHEN

• Go to Settings > Network > Set Up Internet Connection.
• Choose Wi-Fi or LAN.
• Select Custom > IP Address (Automatic) > DHCP (Do Not Specify) > DNS (Manual).
• Set Primary DNS to 62.210.38.117 (Al-Azif DNS) or 192.241.221.79.
• Set Secondary DNS to 0.0.0.0.
• This blocks communication with Sony servers.

The Injection:

3️⃣

Part 2: Prerequisites – What You Need

Disclaimer

Step 4: (Optional) Update GoldHEN Cheat Manager

Step-by-Step Installation Guide

Prep Your USB:

1️⃣ Grab a FAT32 USB drive. Create a folder named PS4 , and inside that, create another folder named UPDATE . 📂

Step 2: Update Your Host Method