Orcad 16.6 - Tutorial __link__

This report outlines the essential workflows for using OrCAD 16.6

• Change the Line Width to 30 mil (carries more current).

This is the bridge between schematic and layout. orcad 16.6 tutorial

• Click OK.
• OrCAD will generate the file and (if selected) open it automatically.

Directory Management:

It is recommended to create a dedicated subfolder for each project to manage the generated .OPJ (project) and .DSN (design) files. 2. Schematic Capture This report outlines the essential workflows for using

• Tools > Quick Reports > Design Rules Check Report.
• Manufacture > DRC > Update DRC. Resolve any shorts or spacing violations.

Editing Values

• Display colors: Display > Color/Visibility. Turn on Etch > Top (pink/red) and Bottom (blue/green).
• Constraints: Setup > Constraints > Physical. Set default line width to 0.25mm (10 mils) for signals.
• Route command: Click the Add Connect icon (looks like a diagonal line). Click a pin. The "ghost" ratlines (airwires) will guide you.
• Switching layers: Type + (plus) on your keyboard to add a via and switch to the bottom layer.