Galaxy | Aqua Premier Installation Manual !!better!!

(Model 45793266), based on official guidance for this series and typical electric water heater requirements. Galaxy Aqua Premier Installation: What You Need to Know Looking to install or replace your Galaxy Aqua Premier Water Heater

Environmental Constraints

: Do not install where it may freeze or inside steam rooms/cubicles. galaxy aqua premier installation manual

5. Step-by-Step Installation Process

Assuming you have a standard three-stage Galaxy Aqua Premier system (non-RO), follow this sequence: (Model 45793266), based on official guidance for this

• Unscrew the horizontal housing.
• Lubricate the O-ring (with silicone grease, not petroleum).
• Push the membrane firmly into the socket until it seats.
• Screw the cap back on.

• Choose a vertical surface near the cold water line.
• Use the bracket as a template to drill pilot holes.
• Leave 2 inches between the canisters and the cabinet wall for removal.

Electrical Connection

: The 9.5kW model typically requires 10mm wiring and must be performed by a qualified person following IEE Regulations. Unscrew the horizontal housing