EZD 361
The "" (often associated with TSPL-EZD ) is a printer firmware feature primarily used by TSC Printronix Auto ID and some GoDEX devices to provide multi-language Printer Emulation . Key Features of EZD 361
Low‑Light Urban Night Shoot
| Test | Conditions | Outcome | |------|------------|----------| | | 1 lux street lighting, wind 5 km/h | 4K video retained crisp detail; minimal grain thanks to ISO 6400 with OIS. | | Coastal Breeze | 15 km/h gusts, sea spray | Forward sensors kept a safe 2 m buffer; no sudden drift. | | Mountain Trail Follow‑Me | 30 % elevation gain, mixed foliage | ActiveTrack kept the rider centered at 15 m distance; slight latency (≈ 150 ms) but acceptable. | | Battery Endurance | 28‑min continuous hover + moderate maneuvers | Achieved advertised 28 min; the extra 10 % capacity on the optional 1800 mAh battery pushed it to ~31 min. | | Signal Drop Test (2 km) | Open field, 5 GHz channel congested | Dual‑band fallback kept video stream stable; drone automatically switched to 2.4 GHz. |
EZD 361 had started talking to itself.
Have you heard the pulse on 361 MHz? If so, you might want to turn off your receiver. Some signals are better left unheard.
- Likely Cause: Loss of 24V DC power supply or reversed polarity.
- Solution: Verify voltage at the L+ and M terminals. Ensure the power supply is rated for at least 100 mA above the total load. Check for blown internal fuse (if accessible) or replace the unit.
To the untrained eye, it looks like a bureaucratic footnote. To those in the know, it represents one of the most audacious—and terrifying—engineering failures of the Cold War era.
Given that the EZD series has been on the market for over a decade, some variants of the EZD 361 are now considered obsolete or end-of-life (EOL). This poses a challenge for plants running legacy machinery.