Epson 1390 Resetter: [better]

waste ink pad counter

To reset an Epson 1390 , you typically need to address either the (causing a "service required" error) or the ink cartridge chips (causing "ink out" errors) . 1. Waste Ink Pad Counter Reset

  1. Turn off the printer and connect it to the PC via USB.
  2. Hold the printer’s power button and turn the printer on (follow any vendor-specific power-on sequence if required by the utility).
  3. Run the resetter program as Administrator on Windows (right-click → Run as administrator).
  4. In the resetter, select the correct printer model (if prompted) or choose the connected USB device.
  5. Click “Check/Read” or “EEPROM” to confirm communication and current waste ink counter value.
  6. Choose “Waste ink pad counter” (or equivalent) and click “Reset” or “Initialize”.
  7. Wait for the utility to complete the operation; it may report success and prompt to turn the printer off/on.
  8. Power-cycle the printer and print a test page to confirm the error is cleared.

The Problem: Why Do You Need It?

Risks Involved

, though it often requires purchasing a one-time "Reset Key". 3. The "Time Travel" Trick epson 1390 resetter

  • Ruined prints (ink spots on paper).
  • Ink leaking onto your desk.
  • Damage to the main logic board.
  • A permanent sticky mess inside the chassis.