Elstat Ems 55 Advanced User Manual New File

Understanding the Elstat EMS-55

Product Overview

: The manual likely begins with an overview of the EMS-55, including its features, specifications, and applications. This section helps users understand the device's capabilities and limitations.

Operating Modes

: The controller automatically learns business hours via motion and door sensors . Active Mode : Switches on ~3 hours before opening . elstat ems 55 advanced user manual new

5. Communication & Integration (Advanced Use)

System Configuration

| Parameter Group | Options / Notes | |----------------|------------------| | | 3-phase 4-wire / 3-phase 3-wire / single-phase (auto-detect based on voltage inputs) | | CT / VT Ratio | Primary current: 1…9999 A; Secondary: 1A or 5A. Voltage transformer ratio if using MV metering. | | Tariff Schedule | Assign each day to tariff type T1…T8, up to 4 switching times per day. | | Pulse Output | Define pulse weight (0.001 – 1000 kWh/pulse), pulse length (30–200 ms). | | Modbus Setup | Slave ID (1–247), Baud rate (9600/19200/38400), Parity (N81, E81, O81), Modbus map version (legacy v2.0 or new v3.1). | | Data Logging Interval | 1, 5, 10, 15, 30, 60 minutes. | | Alarm Thresholds | Overvoltage (>110% Vnom), undervoltage (<80% Vnom), overcurrent, power factor <0.5 lag/lead. | Understanding the Elstat EMS-55 Product Overview : The

The ELSTAT EMS 55 Advanced User Manual provides a comprehensive guide to the features, functionalities, and benefits of this advanced energy management system. By leveraging the ELSTAT EMS 55, users can optimize their energy usage, reduce costs, and promote sustainability. As a cutting-edge tool, the ELSTAT EMS 55 is an indispensable resource for anyone looking to take control of their energy consumption and reduce their environmental impact. Active Mode : Switches on ~3 hours before opening