Craftsman — Digital Multimeter 82082 User Manual !!hot!!

Craftsman Digital Multimeter 82082

The is a manual-ranging tool used for measuring standard electrical properties including voltage, resistance, and current. Unlike auto-ranging models, this device requires you to manually select the correct measurement range using its rotary dial to ensure accurate readings. Key Controls and Ports

  1. Insert black lead into COM, red lead into V/Ω.
  2. Turn dial to DCV (V with straight line) or ACV (V with wavy line).
  3. Select a range higher than the expected voltage.
  4. Touch probes to the test points (parallel connection). Read the value on the display.

is its ability to perform 19 different ranges of measurement. Unlike some more automated models, this device utilizes a manual selector switch, requiring users to explicitly set the appropriate range for each task. craftsman digital multimeter 82082 user manual

Set the rotary switch to the desired V (DC) or V~ (AC) range. Touch the test probes to the circuit under test. Read the voltage on the display. Resistance Measurement Turn off all power to the circuit. Set the rotary switch to the Ohm position. Touch the probes to the component being tested. Read the resistance value. Continuity Test Craftsman Digital Multimeter 82082 The is a manual-ranging

  1. Estimate current. For <200mA, use mA jack. For >200mA up to 10A, use 10A jack.
  2. Break the circuit and connect the meter in series (power off while connecting).
  3. Turn dial to the DCA (A with straight line). Select 200mA or 10A range.
  4. Apply power. Read the current.
    • The 82082 typically contains two fuses: one for the mA range (often 200mA/250V) and one for the 10A range (10A/250V).
    • Open the main body (not just battery cover) by removing the two screws on the back case.
    • Gently lift the circuit board to access fuses.
    • Only replace with identical fuses (fast-blow ceramic of the same rating). Using a different fuse is a fire hazard.