Caraflo V200 Shower Instructions May 2026

Getting Ready for a Refreshing Shower

: Remove the small plugs (usually #8 in diagrams) to access fixing screws. Seal Fitting : Replace the Nitrile rubber O-rings on the wall-mounted brass tails. Lubrication : Lightly lubricate new seals with silicone grease The Shower Doctor Silicone Grease ) or mild soap before reassembly. The Shower Doctor Winter Protection (Crucial) Because the V200 is designed for holiday homes, it must be drained down or disconnected during winter to prevent internal damage. The Caravan Warehouse Freeze Warning

Operating steps

If pressure drops below a trickle, the internal regulator is clogged. caraflo v200 shower instructions

• ✅ Max hot water supply temperature: 70°C (ideally 55–65°C).
• ❌ Not compatible with instantaneous gas water heaters that have wide temperature swings.
• ✅ Works with combi boilers, unvented cylinders, gravity systems (with pump if pressure <0.5 bar).
• ⚠️ If children or elderly use the shower, keep safety stop at 38°C.

: Many Caraflo kits come with a water-saving trigger head. Press the trigger to release water; some models allow you to flick a small switch to keep the flow constant without holding the trigger. Shutting Off Getting Ready for a Refreshing Shower : Remove

Drain the system:

Open all taps (including the shower) to the "mid" position between hot and cold. ✅ Max hot water supply temperature: 70°C (ideally

When Sarah was ready to get out of the shower, she simply turned the handle back to the "off" position. The water stopped flowing immediately, and she was pleased to see that the V200 had automatically shut off, saving water and energy.